elektronische bauelemente fr201g ~ fr207g voltage 50 ~ 1000 v 2.0 a, glass passivated fast recovery rectifiers 01-april-2009 rev. b page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. rohs compliant product a suffix of ?-c? specifies halogen & lead-free features z low forward voltage drop z high current capability z high reliability z high surge current capability mechanical data z glass passivated z case: molded plastic z epoxy: ul 94v-0 rate flame retardant z lead: axial leads, solderable per mil-std-202, method 208 guaranteed z polarity: color band denotes cathode end z mounting position: any z weight: 0.4300 grams (approximately) maximum ratings and electrical characteristics rating 25 c ambient temperature unles s otherwise specified. single phase half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%. part numbers parameters symbol fr 201 g fr 202 g fr 203 g fr 204 g fr 205 g fr 206 g fr 207 g units testing conditions recurrent reverse voltage (max.) v rrm 50 100 200 400 600 800 1000 v rms voltage (max.) v rms 35 70 140 280 420 560 700 v dc blocking voltage (max.) v dc 50 100 200 400 600 800 1000 v instantaneous forward voltage(max.) v f 1.3 v i f = 2a average forward rectified current (max.) i o 2.0 a 0.375? (9.5mm) lead length @ t a = 75 c peak forward surge current i fsm 50 a 8.3ms single half sine-wave superimposed on rated load (jedec method) 5.0 v r = v dc , t a =25 c dc reverse current (max.) i r 100 a v r =v dc , t a =100 c reverse recovery time (max.) t rr 150 250 500 ns i f =0.5a, i r =1.0a, i rr =0.25a junction capacitance (typ.) c j 40 pf f=1mhz and applied 4v dc reverse voltage storage temperature range t stg -65 ~ 150 c a c b a d millimete r ref. min. max. a 25.4 (typ) b 5.80 7.62 c 2.60 3.60 d - 0.90 do-15
elektronische bauelemente fr201g ~ fr207g voltage 50 ~ 1000 v 2.0 a, glass passivated fast recovery rectifiers 01-april-2009 rev. b page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. ratings and characteristic curves (fr201g thru fr207g) 0.1 1.0 .01 10 50 characteristics fig.2-typical forward current derating curve average forward current,(a) fig.5-typical junction capacitance reverse voltage,(v) junction capacitance,(pf) instantaneous forward current,(a) forward voltage,(v) pulse width 300us 1% duty cycle 0.5 1.0 1.5 2.0 2.5 3.0 140 120 100 80 60 40 20 0 (+) (+) 25vdc (approx.) ( ) ( ) pulse generator (note 2) oscilliscope (note 1) 1 non- inductive w notes: 1. rise time= 7ns max., input impedance= 1 megohm.22pf. 2. rise time= 10ns max., source impedance= 50 ohms. +0.5a 0 -0.25a -1.0a | | | | | | | | 1cm set time base for 50 / 10ns / cm trr .01 .05 .1 .5 1 5 10 50 100 d.u.t. .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 3.0 single phase half wave 60hz resistive or inductive load 0.375"(9.5mm) lead length fig.3- test circuit diagram and reverse recovery time characteristics 10 noninductive 50 noninductive w w tj=25 c fig.4-maximum non-repetitive forward surge current 20 0 40 60 80 100 number of cycles at 60hz 1 10 5 50 100 tj=25 c 8.3ms single half sine wave jedec method 0 20 40 60 80 100 120 140 160 180 200 0 peak forward surge current,(a) ambient temperature,( c) fig.1-typical forward
|
